CCE Forums  

Go Back   CCE Forums > Support Forum > Hardware, Networking & More

Closed Thread
Thread Tools Display Modes
Old 06-08-2011, 01:25 PM
CCE Support's Avatar
CCE Support CCE Support is offline
CCE Support Technician
Join Date: Jun 2011
Location: Orlando, FL
Posts: 51
Post How To : Re-calibrate Your Zebra Printer

From time to time, you might need to re-calibrate your printer. For example, if you’ve just changed out the roll of tags in your printer, you might need to re-calibrate your printer. The steps below outline how to re-calibrate your printer.
  1. Power-off the printer
  2. While powering-on the printer, press and hold the green Feed button on the top of the printer
  3. Let go of the Feed button as soon as the light turns red
  4. Wait for the printer to advance tags (It should only advance a few sets of tags)
  5. Once the printer has stopped advancing tags, it will print a small amount of configuration information
  6. Once the printer has finished printing its configuration info, press and release the green Feed button on the top of the printer

Your printer should now have a solid, green light and the tags should be lined-up perfectly!
Computer Consultants Exchange (CCE)

Monday - Friday 9am - 5pm EST
Join us on Facebook!

Last edited by CCE Support; 06-10-2011 at 08:10 AM.
Closed Thread

how to, howto, zebra

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 10:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.